Results 1 to 6 of 6

Thread: Pro Link cable

  1. #1
    Potential Tuner
    Join Date
    Jun 2022
    Posts
    5

    Pro Link cable

    Can anyone tell me how to wire the pro link cable to activate data logging with a switch? MPIV3

  2. #2
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,261
    You can set the mpvi up to trigger logging on its own. I think you can set rpm or speed triggers. I havent messed with that in 3 years on my 2+ so its probably had some upgrades since. Also you can trigger logging with the button on the interface.

  3. #3
    Potential Tuner
    Join Date
    Jun 2022
    Posts
    5
    Quote Originally Posted by 04silverado6.0 View Post
    You can set the mpvi up to trigger logging on its own. I think you can set rpm or speed triggers. I havent messed with that in 3 years on my 2+ so its probably had some upgrades since. Also you can trigger logging with the button on the interface.

  4. #4
    Potential Tuner
    Join Date
    Jun 2022
    Posts
    5
    Correct, looking to find how to do it with pro link cable ?

  5. #5
    Potential Tuner
    Join Date
    Jun 2022
    Posts
    5
    Correct, looking to find how to do it with pro link cable ?

  6. #6
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,261
    If you add your wideband or whatever input to your pid list it should automatically pick it up while stand alone logging.