Results 1 to 4 of 4

Thread: Expert Help Needed: Remote Tuning for Twin Turbo LT1-to-LT4 Tahoe Build

  1. #1
    Potential Tuner
    Join Date
    Jun 2021
    Posts
    2

    Expert Help Needed: Remote Tuning for Twin Turbo LT1-to-LT4 Tahoe Build

    Hi everyone,

    This is my first time posting on this forum, and I'm hoping to connect with expert tuners who can provide remote tuning services for a complex project we're finalizing. Below are the details of the build, and I'm seeking a tuner who can deliver a complete tune for this setup.

    Vehicle and Build Details:

    -Base Vehicle: 2015 LT1 Tahoe (Engine swapped with LT4)

    -Modifications:
    Upgraded internals (forged pistons, rods, etc.)
    Lingenfelter NOSTRUM Stage 2 injectors
    Lingenfelter Stanadyne 1150-250 high-pressure fuel pump
    Holley High Ram intake manifold
    Forced Induction:
    Twin Turbo Garrett G35-1050
    Water-to-air intercooler, cooled by a chiller system

    Current Tuning Situation:

    We previously attempted a local tune, but the tuner lacked the experience required for Speed Density (SD) and MAP-based tuning, which is crucial for this build. We?ve transitioned to a Speed Density approach with:
    -LT1 to LT4 TMAP Conversion
    -LT4 TMAP sensor
    -IAT and BARO breakout harness

    Tuning Requirements:

    1. Primary Goals:
    Implement Speed Density tuning using the LT4 TMAP sensor.
    Optimize fueling and boost control for the twin-turbo setup.
    Achieve safe operation with appropriate lambda targets under boost.

    2. Transmission Torque Management:
    Address the known weaknesses of the transmission with proper torque management strategies, especially during high-load shifts.

    What I'm Looking For:

    I'm seeking recommendations for tuners who can:

    -Provide remote tuning services for this setup.
    -Deliver a complete tune tailored to this vehicle, ensuring optimal performance and safety.
    -Offer transparent costs for initial tuning, diagnostics, and potential retuning if future modifications are made.
    -Provide unlocked tuning files for future adjustments.

    How You Can Help:

    If you're a tuner with relevant experience or know someone who specializes in remote tuning for setups like this, please respond to this thread or send me a direct message. I'm particularly interested in working with tuners who have proven expertise in Speed Density tuning and twin-turbo builds.

    Many thanks,

    Abdulla
    Last edited by uaeproz; 11-23-2024 at 01:41 AM. Reason: Formatting errors fix

  2. #2
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    3,407
    Email me

    Email Tunes, [email protected]
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen5 Viper
    Ultima RS with C8 drivetrain

  3. #3
    Potential Tuner
    Join Date
    Jun 2021
    Posts
    2
    Thanks for your response. I?ve just sent you an email and looking forward to hearing from you.

  4. #4
    Branden Leeb @Elite Tuned. Thank me later..