Hello, working on a LV3 that is giving me some trouble, I've not worked another one and am hoping to find a datalog of a relatively stock truck idling and driving, preferably with all the relevant torque and air flow PIDs. It does not have to contain all the parameters below, I will take what I can get

Commanded Throttle Actuator SAE
Fuel Pressure SAE
Fuel Rail Pressure SAE
Fuel System #1 Status SAE
Intake Manifold Absolute Pressure SAE
Long Term Fuel Trim Bank 1 SAE
Long Term Fuel Trim Bank 2 SAE
Mass Airflow SAE
O2 Voltage B1S1 SAE
Relative Throttle Position SAE
Short Term Fuel Trim Bank 1 SAE
Short Term Fuel Trim Bank 2 SAE
Timing Advance SAE
Vehicle Speed SAE
Accelerator Pedal Position
Actual Axle Torque
Air Density Torque Mult
Air-Fuel Ratio Commanded
Ambient Air Temp
Barometric Pressure
Base Advance
Cylinder Airmass (Spark Airmass (G))
Delivered Engine Torque
Driver Final Axle Torque Req
Driver Pedal Axle Torque Req
Dynamic Airflow
Engine Coolant Temp
Engine RPM
Engine Torque
Exhaust Cam Angle
Fault Torque Mult
Final Throttle Torque Req
Idle Desired RPM
Immediate Axle Torque Cmd
Immediate Engine Torque Cmd
Immediate Engine Torque Source
Intake Air Temp
Intake Cam Angle
Maximum Engine Torque
Minimum Engine Off Torque
Minimum Engine Run Torque
O2 Voltage B1S1
O2 Voltage B2S1
Peak Engine Torque
Predicted Axle Torque Cmd
Predicted Axle Torque Source
Predicted Engine Torque Cmd
Predicted Engine Torque Source
RedPwr Engine Torque Req
TCS Axle Torque Req
TCS Desired Engine Torque
TCS Engine Torque Req
Throttle Desired Airflow
Throttle Position
Torque Mgt Advance
Traction Control Desired Torque
Traction Control Torque
Zero Pedal Engine Torque