Results 1 to 6 of 6

Thread: Problems adding WB

  1. #1

    Problems adding WB

    Have a AEM 30-0334 and always have issues adding it. I'll have it in my chamns list then all of a sudden next log it will be greyed out and when I go to add it again it's not even in the list. Can't use the external ones so have to use the ecu specific WB pid and when it works it works but I just tried for 10 min to add it again and it's not even in the list, the whole list is just gone. So irritating, did 2 WOT runs last night come to find out my WB pid magically vanished again

  2. #2
    Senior Tuner LilSick's Avatar
    Join Date
    Jan 2022
    Location
    fountain valley
    Posts
    1,744
    Quote Originally Posted by Pavetim View Post
    when it works it works but I just tried for 10 min to add it again and it's not even in the list, the whole list is just gone.
    if none of the other channels are populating it might be a connection problem
    [email protected]

    don tanklage

  3. #3
    I am experimenting cause in my desktop they show up all fine so I saved everything in my laptop on the laptop and USB drive so see if that works

  4. #4
    Still not showing up it's greyed out when I open channel listing. I'll load pics later

  5. #5
    Too many channels open i guess and that's the one it said nope

  6. #6
    I've found using a small USB hub and plugging both the MPVI and the WB into it, and then the single usb from the hub into the computer works pretty much 100% of the time. I'm assuming it's putting the USB to sleep or something, I've tried turning off the power management for the USB and it didn't really seem to help. But the constant traffic from the MPVI seems to keep things going enough.