RTT Enabled

[02Z0h6]

I have downloaded the latest version of HPT w EIO and purchased 1-bar SD over a year ago. Can I use the RTT function? When I look under license info. it only says 1-bar SD enhanced. Should it say RTT enabled also? I do not have MPVI. I would check it out on my car but it's still in storage.


Thanks,

Chad

[Bill@HPTuners]

you need to reapply the 1 bar custom OS to your stock operating system.

[02Z0h6]

OK foff. Just follow the re-write entire instructions again then?

Thanks for the response.

[Bill@HPTuners]

yup...just take one of your stock operating system files and follow the application procedure & RTT procedure.

[02Z0h6]

I just remembered that I sent Keith a stock bin file and then I had to re-apply it. Do I have to use the exact file he sent me a while back or can I use any of my stock OS files? Sorry for all the questions man. I'm just not understanding how re-applying one of my stock files is going to give me 1-barSD and RTT. Don't you guys have to modify my stock file in some way to enable it?

[Bill@HPTuners]

oh shoot im sorry...I didn't realize you were still running the old serial interface still...can you post your current file? If need be I'll apply it for you & post it back here.

[02Z0h6]

Thanks foff. This is the tune that is currently in the car. If you need anything else just let me know.

[Bill@HPTuners]

I need your stock file as well 02ZOh6

Thanks
Bill

[02Z0h6]

Here you go Bill.

[Bill@HPTuners]

here ya go...I just converted your newest file to RTT for you. Do a write entire & all should be well.

[Keith@HPTuners]

To avoid confusion..

You can do this with your stock file, just re-apply the VCM Enhancement and do a write entire.

Any serial interface user can do this to use the latest version of the vcm enhancement for their original licensed file.

The same goes for MPVI interface users.

[02Z0h6]

Thanks Bill and Keith. I'm looking forward to trying it out.