I am at school right now but i am concerned at my car's richness @ wot. I set the pe to equal 12.5 to 12.8. I made sure it was in OLSD mode when i was tuning the ve table and the pe was richer than the other table.

I logged afr error against the map vs rpm and then paste special multiplied by % many times.

My concern is even after doing this for multiple long drives and then tuning for wot, i am still getting up to 10% a/f error. Anything I might be doing wrong? It seems that under full throttle lower rpms, it is off and by the time it gets to the high rpms it settles.