My car is a Y2K C5.
I see I have activated 1 bar, but ID like to have 2 bar. How do I change that,
ALSO
I cant seem to find my RTT. how do I find it and activate it
My car is a Y2K C5.
I see I have activated 1 bar, but ID like to have 2 bar. How do I change that,
ALSO
I cant seem to find my RTT. how do I find it and activate it
Make sure you are using the latest releas (2.1.18). Open your stock file & apply 2 bar RTT. Copy VE table from your current 1-bar SD cal to the 2-bar RTT cal and any other settings that you changed. Follow all the instructions in the help file (including selection of an RTT mode Default is Disabled...)
Always Support Our Troops!
let me ask the reason your going to a 2 bar operating system? Are you going forced induction?
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
no FI, but dont I need it for speed density. OR can I do SD with one bar.
I was running through the help files, but RTT doesnt come up on my scanner tool bar .
The more I learn, the more confused I get .
There is a 1bar SD and a MAF option that both include RTT for some OS'
We got this guy Not Sure, ...
maybe my OS doesnt have RTT option.
2000 C5 ?
make sure you've enabled a mode as outlined in the help file otherwise the RTT wrench will never come up
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Ive been looking for most of my information either in the starter pages of the scanner or editer guide and wondering how Im supposed to figure all this stuff out, and I could find the answers. I ask you guys, and wonder why isnt this information somewhere on here.
Then I found the help files which has 95 % of the information Ive been looking for on how to tune a car. Im burning up a ream of paper printing it all out to place in a nice notebook to read.
The help is much more informative then the starters guide Ive been reading
On the good side of it, I got my engine management advanced tuning book today
Ive got some reading to do before the next question.
Ill figure this tuning stuff out yet. Ill be gunning for Bill's job in 8 years
Thanks
Phil
I'll be waitingOriginally Posted by Phil'sC5Vette
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I have a 2004 GTO with a procharger. I want to license the 2 bar map, but I
don't know how. Can someone please tell me how. Thanks.
Donc43
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"