Page 2 of 2 FirstFirst 12
Results 21 to 25 of 25

Thread: tuning write up !!!!

  1. #21
    Advanced Tuner
    Join Date
    May 2004
    Location
    FWB Fl
    Posts
    299
    Quote Originally Posted by gold98Z28
    i feel ur pain. dont work in lovely Iraq either.
    it probly the net work filter but i have idea whats on my site that might be setting off the filters
    http://www.turbov6camaro.com
    1997 Stalled V6 Camaro
    Goal: 10.99 in the 1/4
    Goal: 100 MPH (completed)

    Best Dyno: 456 RWHP and 509 RWTQ
    Best: 1/4 mile 11.23 20 PSI
    Best1/8: 7.18 @ 99 1.83, 60 foot 20 PSI

  2. #22
    Senior Tuner
    Join Date
    Feb 2006
    Location
    Canada
    Posts
    1,957
    Hey guys

    I have had some excellent results in the last couple of days with the new WB and would now like to get into the timing tables. Have been reading this link on tuning the High Octane timing table. I get the part where we add timing until KR and then back it off in the table for KR.
    Will this process "naturally" lead me to a nice smooth graph? Looking at my timing table in the graph view looks terrible(all over the place). Have seen the work Russ and Howie ended up with on their vetts and would like to know if I'm headed in the right direction?

    As always, thanks for lookin'
    Paul

  3. #23
    On my LS6 car I've read the VE provides transitional fueling correction to the MAF.

    On my 3800 People say the VE does nothing unless the MAF fails.

    Having said that;

    From experience, if I'm driving along on the freeway in my 3800 vehicle, and pull AT to 2nd gear then go WOT, there will be 0 KR.

    If I leave it in "D" when going WOT, there will be several degrees of KR.

    I've tried changing my PE Fuel Adder v.s. RPM v.s. Time table to privde additional "tip in" or "splash" fuel on the 0 sec row with the 1.6sec row and on returning to normal.

    I don't believe this is fasle KR as with 110 octane mixed in, there will be 0 KR.

    Anyone else see this behavior?

  4. #24
    Tuner
    Join Date
    Jul 2009
    Location
    Poughkeepsie, NY
    Posts
    61
    Well that and he is on a high compression hair dryer of a blower. I know I used to have one until I went turbo and couldnt even get the thing to knock on pump.

  5. #25
    Potential Tuner
    Join Date
    Jan 2020
    Posts
    1
    Does anyone have a write up on how to tune a stock ly7 or any similar gm V6s? I have had very minimal experience tuning and need a bit of help getting started again.

Similar Threads

  1. Correct Tuning Procedures
    By Jax5.7 in forum GM V8 Tuning - Engine, Gas (Gen 3)
    Replies: 4
    Last Post: 05-12-2022, 11:51 AM
  2. Your Guide to a good tuning experience
    By Bill@HPTuners in forum VCM Suite General
    Replies: 12
    Last Post: 10-27-2010, 11:59 AM
  3. Any write ups on TCC tuning?
    By Mep_q8 in forum VCM Suite General
    Replies: 0
    Last Post: 12-03-2006, 04:47 PM
  4. Biggest tuning troubles there are no write ups for? or wrong write ups?
    By WS6FirebirdTA00 in forum GM V8 Tuning - Engine, Gas (Gen 3)
    Replies: 24
    Last Post: 01-15-2006, 11:11 PM