auto scaling transmission tables

[ct06gto]

Im just curious on this. If i were to use this feature for a gear change from 2.93 to 3.29 would i just change the scale multiplier to .8905?

2.93/3.29 = .8905

and if i were to go from 2.93 to 3.69 would i change my scale multiplier to
.7940?

2.93/3.69= .7940

[Bandit gs]

There really isn't an answer for changing the gears, nobody knows. What i'm going to do it change the 4 speedo values and then remove about 25% from the transmission tables. The auto function doesn't work when we change gears, we really aren't changing gears, but sprocket ratio. It says there is a way to manually scale them using a value, without excel does anybody know how to do that?

[Chris@HPTuners]

you can use the manual scale option on the speedo form. Just work out the factor (multiplier) you want to scale the tables up/down and the software will auto scale all the trans speed related tables.

eg. if you went to a lower gear meaning you now go slower for the same RPM, you would scale your trans tables by a number like 0.9 or something.

eg. when moving from say 3.42 gears to 3.91's you would scale the trans tables by 3.42/3.91

Chris...

[ct06gto]

ok, i guess my assesment was correct.