-
Potential Tuner
Not moving fuel cutoff
What sensor is referenced for the not moving fuel cutoff. I tested this out and it is non functional. The vehicle is not an ABS vehicle, so I am wondering if ABS sensors are monitored for this function or is the vss in the tranny referenced.
Thanks!
Don
-
HP Tuners Owner
some vehicles it is not used, others it is used for reverse gear rpm limit.
-
Potential Tuner
What's the trigger for it to use the table? Can I make it functional? I would like to use it as a launch control on a manual car. Is the table active and just needs inputs from a reverse switch indication or similar? Was this used on automatic cars?
Last edited by don2; 06-21-2007 at 08:30 AM.
-
HP Tuners Owner
sorry, i got confused with the speed limiter
The Not Moving limiter works in PN for Auto trans or below a calibrated speed for manuals (the cal i am looking at is set at 20mph).
-
Potential Tuner
hmmm..so it should have been working for me. Where is this speed set at? Is that in my definition file (I am using the 2.2.19 beta)?
Thanks!
-
HP Tuners Owner
email your file to support along with a link to this thread.
Chris...
-
Potential Tuner
Any luck with this? Thanks!