I used to be able to log things like MPH, gear, IAT, MAP in kpa (I can only see MAP in volts now), and others - these are not available anymore and show up as unsupported, if at all. I believe this may have occurred after my fiasco as detailed below...
Basically, I made the mistake doing an unnecessary write entire with my old (original) PCM and bricked it. It was a bad idea and I don't even remember why I did it, save the flaming
Anyhow, I ordered another junkyard 2002 PCM to replace it (I have a 2002 Grand Prix model year license). This replacement PCM was from a non-SC car, and wasn't working correctly in my SC car...so I decided to take another chance on a write entire with the code from my old PCM. While that write entire made the car run properly, many of these parameters mentioned above are not available...making my tuning experience difficult.
I connected to another vehicle and was able to log these items correctly, so I believe the problem is with my replacement PCM or it's code. I do have another 2000 Grand Prix GTP computer, but no license - and I don't really want to spend another $100...but, I might if I _know_ it will resolve the issues.
Thoughts?