Anyone have a 2 bar SD basic start cal for a 99 auto trans f body?? The car is going to have 42# inj on a completely stock motor and small turbo. Any help greatly appreciated( nothing in the repository)
Anyone have a 2 bar SD basic start cal for a 99 auto trans f body?? The car is going to have 42# inj on a completely stock motor and small turbo. Any help greatly appreciated
Last edited by rico996tt; 06-28-2007 at 05:35 AM.
Copy your existing VE table to the 2 bar table. Then go to the 210 Kpa line and put 150 in that line. (Or less below the turbo spool point, usually around 2800 RPM). Then Interpolate between 105 Kpa to 210 Kpa. Now you have a basic table setup.
Then set your Boost Enrich to have 12.8 AFR at 100 Kpa, 12.0 AFR by 145 Kpa and 11.5 from 170 Kpa on up.
Remember those are commanded AFR values not actual. You'll have to adjust the VE table to make commanded = Actual
Always Support Our Troops!
Reply With Quote