I tried to add a IDC gauge in the scanner but nothing showed up....
I have a 2001 cavalier 2.4L LD9.
I noticed that inj b1 and inj b2 don't move at all when I scan but everything else work great.
It's like I can't log injectors at all...
Anyone had this problem?
Thanks
I now have the IDC gauge working but as soon as I get to 3000rpm the IDC climb to 1000-3000%. I deleted all the bank2 injectors and don't know why the IDC is way off..
Any suggestion? Thanks!
post your scan where its doing this.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Here's the log!
Around frame 2200 you can see IDC goes up at 3000 RPM.
doesnt show it past 10% inj duty for me. you engine temp is hella high too.
2006 SS Cobalt SC
Stage 2 ZZP Cams
Headers, 3.0" Full ZZP Exhaust
60lb inj. Intake.
2.8 Pulley
72# Lb. Supertech Springs
LNF Ext Valves and lashers
Cobre H/E, option B.
Torque Damper
HPTuned.
Bitchin'.
Yeah that's weird! Take a look at the pic... 571256% IDC... ishhhhhh!
I'm running 2.1.18 and you?
Thanks
im running 2.1.18 but a diff config file for the scanner perhaps posts your config file to see whats going on.
2006 SS Cobalt SC
Stage 2 ZZP Cams
Headers, 3.0" Full ZZP Exhaust
60lb inj. Intake.
2.8 Pulley
72# Lb. Supertech Springs
LNF Ext Valves and lashers
Cobre H/E, option B.
Torque Damper
HPTuned.
Bitchin'.
works fine for me as well. Close your scanner & Go to your hptuners folder & delete your vcm scanner.cfg file and you should be back in business.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
That's it! Thanks!
Reply With Quote