Results 1 to 3 of 3

Thread: setting up a 3v 4.6 on engine dyno?

  1. 07-11-2007 #1
    horsepower1
    horsepower1 is offline
    Potential Tuner
    Join Date
    Jul 2007
    Posts
    2

    setting up a 3v 4.6 on engine dyno?

    We're trying to get a 3v running on an engine dyno - complete factory setup. Not sure what we're missing; it'll fire occassionally, but then shut down right away. We take the same PCM and stick it in a car, engine fires right up.

    PATS is disabled (BTW, the disable/enable are backwards in the tuner), clutch switch is disabled. What else am I missing? Anyone done this?
    Reply With Quote Reply With Quote
  2. 07-11-2007 #2
    horsepower1
    horsepower1 is offline
    Potential Tuner
    Join Date
    Jul 2007
    Posts
    2
    better, does anyone have a tune file already setup for a dyno I could look at?
    Reply With Quote Reply With Quote
  3. 07-12-2007 #3
    Screamn03
    Screamn03 is offline
    Advanced Tuner Screamn03's Avatar
    Join Date
    Feb 2004
    Location
    Vacaville, CA
    Posts
    832
    Are you running the same exact airbox/air-intake as installed in a factory car?
    -Michael Rudolph-
    2003 Redfire Cobra
    Eaton Powered to a:
    11.301 @ 129 1.68 60' MT DRs
    11.85 @ 124 1.90 60' street tires
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »