Any ideas when this will be coming out? I've downloaded a stock bin and sent it into support... was told a week, my friends dying to get some tuning done, plz let me know what kinda of timeframe u guys are looking at to release the credits.. thanks for your time
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
bump for a reply plz
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
5.4 is already supported, im waitin for the mustang support for 99-04
we plan to make the public release in the next couple of weeks
I count sheep in hex...
beta support for the previous mustang gen too?Originally Posted by Chris@HPTuners
no timeframes for EEC yet.
I count sheep in hex...
if its alright with you could u send me a beta link so i can get a tune loaded onto my friends truck plz.. cheers!
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
Ford credits are not yet for sale.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
everythings for sale under the counter
and plus i have heard some problems about the dashhawks not being able to work with some models coz of their HEX codes, i could be a guinea pig for a middle eastern spec ford pick up...
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
damn, no 04 support
will we be able to do 04+ explorer's with the 4.6 V8
2006 Ford F250 CCSB 6.0 Powerstroke
SCT Tuned by Vivian @ QuickTricksAutomotive
My buddy has a 02 Mustang and is looking for a tuning program. Does HPT have one that will be out in the next month or so? If yes he will get it, if not he needs to look else where.
Thanks
99Z A4 w/ SS LT's, h/f cats, magnaflow catback, port/polish t/b, egr deleted, ls6 intake, lid, 3.73's, hpt, performabuilt level 1 tranny, 3600 stall, Stage 2.5 (5.3 heads), Torquer 2 cam, 42# reworked injectors, TR6 plugs.
2007 Avalanche LTZ - Catback and Eibach springs
no timeframes for EEC yet.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
what did ford go to after eec? 04 is eec V i think, right? i thought 05+ would be eec VI.
Quoted from our very own Screamn03
For Mustangs the change to the CAN stuff happened in 2005, 96-04 Mustangs were the EEC-V, EEC-IV came before that.
All EEC stands for is Electronic Engine Control
Kinda of a general rule of thumb to go by is if it has a cable throttle it's most likely an older EEC PCM.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I've noticed alot of new ecms are tagged black oak. Any body have any ideas?
Silver oak, black oak, spanish oak...what do you need an idea about exactly? Kinda like E67, p59, E38, E40 for gm.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I found it!
Ford Motor Company's new Black Oak powertrain management software.
I'd done a couple read with some other stuff and the eeproms are labeled as Black oak.
is the '04 5.4L V8 an EEC or is it already supported?? IF it's not EEC, any time frames?? I've been told next week for the past 3weeks!
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
For Mustangs the change to the CAN stuff happened in 2005, 96-04 Mustangs were the EEC-V, EEC-IV came before that.
All EEC stands for is Electronic Engine Control
Kinda of a general rule of thumb to go by is if it has a cable throttle it's most likely an older EEC PCM.
Reply With Quote