My FFR GTM is on the road! Video within...

[David Borden]

Ive had my HPT tuned GTM on the road for a few weeks. We took some video of it rolling down the road.

(right click save target as)
http://www.gtmbuild.com/galleries/videos/gtm_run.wmv

Let me know what ya think!

David

[Screamn03]

Neat looking ride.

[12secSS]

Well that sucks ...




... for me. That is one very impressive car. So tell us about it, it is not fair just to post a video (although it is very good).

[LeadFoot]

Right nice lookin' and sounding ride. I likes the color.

[Screamn03]

How much power can you put through the transaxle?

[codename Bil Doe]

The rearend hasn't grown on me, but such a nice car! Is it the ls1 or newer ls7 version?

[David Borden]

12sec, Its a FFR GTM that Ive been building for about 18 months or so. Its a modified LS1 with LS6 heads, intake, custom Comp Cam, springs, titainium retainers, Katech Rod bolts and custom Kooks stainless long tube headers and X pipe exhaust system. Total weight is 2359 lb wet without side windows, so figure 2380 lb or so done. Car has AC, heat, cruize control and fully insulated. Transaxle is from a mid 90's 911 with 6 spds.

If your interested in seeing my build log, check out www.gtmbuild.com and look in the links section.

Screamn, thats out for debate, but most say the transaxles can handle in the area of 500 hp or so... Very few have had problems in Ultimas.

Bil Doe, the factory has a LS7 based car... I drove it a few months ago... the thing is a monster! the torque in such a light car is quite a rush. Almost no wheel slip since the engine is just in front of the rear wheels. Thing pulls like mad.

David

[Keith@HPTuners]

David, that car looks like a TON of fun! Very impressive!

[WS6FirebirdTA00]

man, that car looks awesome! I bet it flies being so light!