Hey I am tuning my timing table and have the historam for knock in the scaner set up. What I was trying to do is copy the knock and then past it with subtract into my tune. I am having a problem because it doesn't line up and takes the timing out of the wrong spots. Am I donig something wrong or do I have to just manualy transfer it. Thanks,Chris.
could you post up tune & scan ...
.....before and after......
2.4 ecotech ( 2006 pontiac solstice )
42lb injectors
trim 50 garrett t3t4 (custom -barebones pumpking )
boost @ aprox 7 <10
38mm tial wastegate and bov
3" tubes front to back
werks radiator
bell intercooler
GXP,magna flo exhaust-with integrated dumptube by B_FASTER & R&D
aem wideband
custom manifold -by sh**er the skunk
(((HP ))) tuning -in progress
jet hot 2000
aerospace logic egt kit
make sure your copying & pasting the entire table, not just one cell.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
make sure you are in the first upper left cell when u copy and then the same cell when u paste.
2006 SS Cobalt SC
Stage 2 ZZP Cams
Headers, 3.0" Full ZZP Exhaust
60lb inj. Intake.
2.8 Pulley
72# Lb. Supertech Springs
LNF Ext Valves and lashers
Cobre H/E, option B.
Torque Damper
HPTuned.
Bitchin'.
Thanks guys I didn' t realize I wasn' starting at the top L corner. I blew the histogram to full size and could see what was going on.
Reply With Quote
