Results 1 to 4 of 4

Thread: trading in efi live for hptuners

  1. #1
    Tuner zl1killer's Avatar
    Join Date
    Jan 2006
    Location
    Charlotte, NC
    Posts
    77

    trading in efi live for hptuners

    guys, i want to be able to tune my v6 cars and such along with buddies dodges eventually. I own a 2005 malibu 3.5L and a 2006 malibu max 3.5L ... i saw the supported car list and it didn't list a 05 malibu 3.5L?? is it tuneable?

    also, if this post needs to be removed and i strictly take it to PM's to moderators/sales contacts thats fine. I Would greatly like to be able to tune my cars, and as efi live doesn't have v6 tuning NOR a lot of other cars listed....i'm wanting to switch. who do i need to talk to
    01 T/A WS6 #4984 PM for info...funny rear mount...father/son build.
    My STS build
    NEW: TC76, 69.65# FIC725, FPR, External Bosch 044, Moser 12 3.42,
    Manifolds, Forged Rods + Pistons,

    Numbers to come...

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,268
    I don't believe we support either of those V6 pcm's at this time. Its an oddball pcm that was only used for a couple of years in very few vehicles. If you'd still like to consider purchasing you can post here or contact sales at hptuners.com with any other questions you may have concerning the program/supported vehicles/capabilities.

    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Tuner zl1killer's Avatar
    Join Date
    Jan 2006
    Location
    Charlotte, NC
    Posts
    77
    06-07 Chevrolet Malibu 3.5, 3.9 (3.5 in 07 only) (copied from vehicle supported page)

    06 is the malibu maxx that i have....or does that not include the max?? because they are all 3.5L engines... I'm assuming they are using the same pcm and motor though
    01 T/A WS6 #4984 PM for info...funny rear mount...father/son build.
    My STS build
    NEW: TC76, 69.65# FIC725, FPR, External Bosch 044, Moser 12 3.42,
    Manifolds, Forged Rods + Pistons,

    Numbers to come...

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,268
    Yes you have it correct the 3.5 motor is ONLY supported in the 07' models.

    The 05-06 3.5's use a different pcm that we do not currently support.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"