-
Potential Tuner
Enable PIN 42
can anyone give me a run down on how to enable PIN 42 using HPT, I build harnesses for LS1 fan installs using pin 42 and i have a guy that purchased a harness from me with HPT and he does not know how to enable the fans, Please include any temp settings as well.
Thanks in advance,
Derek
-
Senior Tuner
You need to go to the System Settings and enable the Fan, follow the red circle in the image attached.
Also, you will need to compensate for the extra load in the idle airflow section, just enter the stock values shown here from a stock 2001 F-Body calibration (circled in green)
Last edited by 12secSS; 04-02-2012 at 06:56 PM.
-
Potential Tuner