Help tuning 05 Mustang- ETC do not exceed 76%

[HA-KSA]

Hello,

While scanning the car i have noticed that ETC (TPS) do not go more than 76%, i tried to modify Max throttle angle vs RPM all to 100,Throttle angle max from 90 to 100 and Pedal angle vs pedal all to100 finaly Throttle anglevs pedal all to 100. BUT it is still the same.

I have tried to find another PID to log to see if it the same as the LS2 case but no luck.

Please Hellllllllp

[jah81592]

If commanded throttle is say 76 at wot, that doesn't mean 76 is 76% of 100%. 76 is wot. If you notice in a Mustang (not Shelby) that the values will decrease with less throttle. What you need to do is set all values at max this will allow wot at lower rpm. Keep in mind that there are several other areas which need to be changed.

[HA-KSA]

I new to ford tuning, would you kindly give me a hint about what are the suggested tables to modify and whay are the values

[Tony@HPPerformanceInc]

ETC Max Throttle Angle vs RPM is 82 on Ford ETC Tables.

TonY G

[Justin@VMP]

In the ford world we don't care about TPS percent, its all about angle on the ETC stuff and TP counts on the older stuff.

Now if you make the blade go back around that could have some intersting results, if the motor will actually do it.