I have decided to switch over to the 2 bar OS finally. I have not been able to track down all of the part numbers needed. I intend to totally remove the MAF.
For the plug and play 2 Bar MAP: GM P/N: 12580698 AC Delco: 213-1631
I still need a IAT sensor and the wiring adaptor to plug into the MAF connector.
Any help on making this conversion go smooth is appreciated.
RHS Block 427, Mast/ PI 275 Heads, A&A YSi SC, 3.125Pulley, 238/254 LSA116+5, Flip Drive, AR 1 7/8 Headers, Corsa Touring Cat Back, RPM Level VII Tranny/ Flexplate/ Drive Plate, PFADT Carbon Fiber Drive Shaft, RPM rebuilt DTE Stage 4 3.42s, Vigilante 3 Disk 2600 converter, Custom Fuel System with Dual A1000 Pumps, ID 1000 injectors, Triple Nozzle Alky Control, 3 Bar SD Tune using 2.5 MAP. 935rwhp 800rwt
IAT Sensor: Use a 2002 F-body IAT and the pigtail adapter.
I don't have the P/N for it handy on the weekend.
Always Support Our Troops!
I came up with a few more part numbers for the conversion;
1 Sensor;int Air Tem
ACD 213-243
1 Grommet
ACD 24504388
1 Connector;2-way Female Gray
ACD PT307
RHS Block 427, Mast/ PI 275 Heads, A&A YSi SC, 3.125Pulley, 238/254 LSA116+5, Flip Drive, AR 1 7/8 Headers, Corsa Touring Cat Back, RPM Level VII Tranny/ Flexplate/ Drive Plate, PFADT Carbon Fiber Drive Shaft, RPM rebuilt DTE Stage 4 3.42s, Vigilante 3 Disk 2600 converter, Custom Fuel System with Dual A1000 Pumps, ID 1000 injectors, Triple Nozzle Alky Control, 3 Bar SD Tune using 2.5 MAP. 935rwhp 800rwt
Anyone have a part# for a screw-in IAT and pigtail that will work with a 98 PCM (not sure if any different)? I'm afraid that the stock one will pop out of the gromet under heavy boost.
98 Z28 370 LQ9 w/ TH350, FTI 4800 Stall, OLSD, NW90 TB, 80# Motron Inj, AFR 225's, 231/231 .624/.624 114, Mamofied FAST 90 Intake, PT88 Front Mount w/ 4" DP dumped before the Strange S60 w/ a 3.73 gear
iat sensor for 97 corvette sensor # 12160244 19.50 Pigtail# 12102620 20.00
Ask them to look up the grommet that goes with these parts and you'll be in business.
Hsquared racing engines RHS 427, Procharger F2, Moran Billet Atomizer injectors, Alky Control,Mast LS7 heads, Nitrous outlet kit,Tilton quad disc clutch, DSS shaft, RKT56 ZR1 trans, RPM Quaife diff. Built and tuned by yours truly.
I know a few running with the grommet at 12-15lbs of boost with no issue.
RHS Block 427, Mast/ PI 275 Heads, A&A YSi SC, 3.125Pulley, 238/254 LSA116+5, Flip Drive, AR 1 7/8 Headers, Corsa Touring Cat Back, RPM Level VII Tranny/ Flexplate/ Drive Plate, PFADT Carbon Fiber Drive Shaft, RPM rebuilt DTE Stage 4 3.42s, Vigilante 3 Disk 2600 converter, Custom Fuel System with Dual A1000 Pumps, ID 1000 injectors, Triple Nozzle Alky Control, 3 Bar SD Tune using 2.5 MAP. 935rwhp 800rwt
Go to: http://www.bmotorsports.com/shop/ind.../cPath/129_142Anyone have a part# for a screw-in IAT and pigtail that will work with a 98 PCM
They stock all your needs.Sensors,Connectors,Pigtails,etc
Last edited by talsayed; 03-13-2009 at 06:40 PM.
Reply With Quote
