Can anyone post an IFR table for 42 lbs. injectors
And what are the solutions to outflowing the maf resulting in a P0103 error
Car is 2006 Cobalt with sc and turbo at 22 psi
Thanks
Can anyone post an IFR table for 42 lbs. injectors
And what are the solutions to outflowing the maf resulting in a P0103 error
Car is 2006 Cobalt with sc and turbo at 22 psi
Thanks
2003 MY Z06 3.3 liter whipple ...sold at around 1000 rwhp
wip 2015 Silverado w/2.9 Whipple (phase 1 completed) phase 2 in the works
move your fail frequency up to over the point that your hitting.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
It's over 12k
Is there a max?
2003 MY Z06 3.3 liter whipple ...sold at around 1000 rwhp
wip 2015 Silverado w/2.9 Whipple (phase 1 completed) phase 2 in the works
listed in the scroll over help.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I have mine set at 13500
FWIW most NA LS1 fbodies have it set at 13500hz in stock form.
Not really sure why GM sets it so low in stock form on boosted cobalts.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Me either, it sets a 0171 with a CAI added and the fix is to raise it.
Reply With Quote