-
Tuner in Training
Weird Issue
Well, I just got done doing a head gasket on my car. For some reason The car after idling for a tad bit starts to go pig rich. When I force the car to stay in Tuner Mode (open loop) I can drive the car.
I've tried to retune the car and place it back in closed loop and it does the same thing. Instantly starts going rich after idling for a bit or driving the car.
Also my CMD AFR would read previously before the job was done as 14.60 during cruise and idle now it is commanding 14.00..
Any ideas?
-
Tuner in Training
Nm figured the problem out. It was an engine ground.