I guys,
I got a Holden Commodore VE SSV M6 6LTR L98.
Has anyone done a mafless tune for the E38/E40 ECM and if so what are the steps in doing so cause there is no VE table for these ECM's.
Thanx.
tony
I guys,
I got a Holden Commodore VE SSV M6 6LTR L98.
Has anyone done a mafless tune for the E38/E40 ECM and if so what are the steps in doing so cause there is no VE table for these ECM's.
Thanx.
tony
There is a VE table in the E40. When I tuned mine, I ran in SD for a few days to get it dialed in. There's an SD tuning guide around here somewhere. Let me see if I can find it.
Edit: http://www.hptuners.com/forum/showthread.php?t=9700
Last edited by Scooter70; 02-08-2008 at 10:49 AM.
1970 Corvette LS1/T56
2001 Corvette Z06
how can i make my scanner reads the timing for tow or three map sensore
You change the MAP Sensor linear and offset in Engine Diags, Airflow. For a 2 bar sensor the Linear is 200 and the offset is 8. Donno about a 3 bar though.
Bill Winters
Former owner/builder/tuner of the FarmVette
Out of the LSx tuning game