Lets say I program my car for 3.73 gears and 25" tire but the car actually has 3.23 gears and a 25" tire. Would the RPMs and MPH on the gauge cluster line up at the proper RPM/speed even though the speed is off?
Lets say I program my car for 3.73 gears and 25" tire but the car actually has 3.23 gears and a 25" tire. Would the RPMs and MPH on the gauge cluster line up at the proper RPM/speed even though the speed is off?
'99 Camaro Z28 A4, TSP 85mm lid, PP 85mm TB, delphi 85mm maf, LS6 intake, forged internals, 230/232 612/595 111+2 LSA, ported 853s with 2.02/1.60 valves, !egr, !air, Edelbrock LTs, 3" TDs, 3" cats, red top 30# injs, Performabuilt LVL2 trans, Yank SS3600 stall, truetrac diff
Not sure what you are getting at here. If you put the wrong stuff in there, your speedo will be off, that is what that calibration is for.
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
Reply With Quote