-
Tuner in Training
1bar sd ok for low boost?
I'm starting a turbo build on my 03 corvette and all ready have 1 bar sd applied. sooner or later I'm going to upgrade to 2bar sd when i turn up the boost, but until then would i be OK to use 1 bars sd for a while on low boost, around 5 psi, or would i be better off going back to the stock os? also from what i read it will only cost me one more credit to up grade to 2 bar?
Last edited by marky_24; 02-09-2008 at 07:57 PM.
-
Tuner in Training
anything over 105kpa and your in no mans land. just get a 2bar sensor and apply a 2bar OS. as you said, its only 1 credit, its not worth risking your engine over, or you could go back to your MAF.