i hook up the programmer to the car and have the car running. i hold the record button for a couple secends but flashes error light on the programmer.
i hook up the programmer to the car and have the car running. i hold the record button for a couple secends but flashes error light on the programmer.
Please follow the demo in our help file http://www.hptuners.com/help/demos/s...onelogging.swf
It will walk you through step by step of what you need to do.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I already did that stuff in the demo even before i post this thread. i even searched the forums but still have error problem
Please contact support with a vcm suite infolog while connected to the vehicle & I'll take a look.
-Bill
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
A few times playing around, I've found that having an invalid PID in the scanner will cause that when loading the config for stand alone.
Make sure that all the PIDs you are trying to scan are applicable to your car.
____________________________________
Good engineering is simply finding the right wrench to pound in the correct screw.
He's got a Ford which standalone datalogging hasn't been implimented on them yet.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Reply With Quote