Hey everyone,
I was tuning an 07 Legacy truck (FlexFuel, DOD) I was tuning the MAF and put the car into open loop as well as set all the OL value to 1.00.
On a 07 Corvette that allowed me to pretty much isolated the AF to whatever the PE was commanding, but on this truck it always revert to 11.74. What gives?
I have attached the log and file, because at this point I'm not quite sure what prevented the car to command what is in the PE table.
The other thing you will notice from the log is that when the car is at idle it's commanding 13.69 which was another issue that I could not quite figure out. At first I thought it had to do with the fact that maybe some ethanol was detected in the gas and was commanding a richer A/F but after playing around with the Stoich table it didn't really make a difference.