Check this out for me.

[always last]

This looks like a software problem. Reload the HP disk and I should be fine. But with two VCM's already unusable, I'm not making a move without asking. Everything works fine except the real time. Drove to work using real time and everything was normal. Went to load rt for the ride home and this is what I found.

[EC_Tune]

Did you enable a RTT mode on the General Tab? If not that's what you get.

[always last]

I've been using it with no problems. Load the 1b SD file. Start the scanner-hit the wrench- start the sd and away we go. General tab is turned on for vetpsve. You know the history with my vcm's. Should I reload the Hp disk or is it possible the file in the vcm went south? I can do a write entire. I'm out of vcm's if this one screws up. Any thoughts.

[Bill@HPTuners]

Do a read of the file currently in the pcm & post it.

[always last]

I bit the bullet today and did a write entire and I'm back to normal. That write entire button scares me, It's kicked my ass twice. This time it worked out.

[always last]

Bill. I just ordered the Learn at Home coarse from The Tuning School. No classes in the Boston Ma area. Any comments on the book?