Looking for MORE than a bunch of stock tunes for 4.8L and 5.3L engines. I understand that alot of tunes are sent in but my guess is they are not all getting approved due to liability. Basically the repository is too limited for my needs.
Want to compare so I'm interested in lightly modded tunes (CAI, Headers, Free flow exhaust, Trans. tuning/ect.) and some cam/blower tunes.
Please list year/make/model/mods if posting up your personal tune.
Thanks in advance!
Interested at this very moment in the following.
Working on an 2006 GMC Sierra 5.3L Auto with Full Length Headers & GM Performance Parts Hot Cam.
Cam Specs : Hydraulic Roller, Duration at .050 in. 219/228, Lift .525/.525
the repository is only good for people who use it to load files. There is no liability because it is your choice, it is just a collection of tunes.
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
So true! I use it for stock tunes if I need a base to work with or learn from. Purpose of this thread - Instead I am coming to the source (members) to get a copy of an already tuned 4.8L or 5.3L to see what people are changing. Please post up if you have anything to offer even if not for the same year I am working on. Let me know how well it crosses over the current engine I am working on as well. Thanks!
i have a 2004 tahoe that ive been working on the tune for a year
its got a 4.8l
ive got 2 tunes - one i use for nitrous (150 wet shot)
and the other is for 93 octane fuel
if you want one or both PM me with your email adress and ill send it to you
Awesome! Pm Sent!
Where Is This Repository??
2008 TrailBlazer SS AWD 3SS, Keystone Camaro SS Style Hood, LS1 Dual Fans, LS7 TB, 80lbs Injectors, Meth Injection, TVS2300 @14lbs, Innovators West 10% Overdrive 8-Rib Crank Pulley & T-Mac's 2.9" RIP 8-Rib Pulley, A.R.H. Stainless a Steel 1 7/8" W/Cats and a Full Custom Stainless Steel Dual Exhaust, Tune Time's Blower Cam
Go to the main hp tuners website...there is a link there to the repository. cheers.
2010 Avalanche 4WD; AES 390; Mast LS3 heads; VVT Cam; ported TVS2300; Overdrive 8 rib pulleys; 2.7 snout pulley; ID1000; LS3 TB; WB 450; Twin MM cans; built 6L80; CircleD Triple Disk, CSR flexplate; Trucool 40K; Aeroforce Dual; AFX
Where on the hp tuner site is it?
Peope always forget to tell you the kicker...you have to OWN Hp Tuners hardware/software first...then go to www.hptuners.com and enter your serial number/password. ONLY then can you see the tune repository.Originally Posted by Pops01Sierra
Janky Monkey Tuning
Call or PM for tuning solutions.
Cell 210-954-4985
Wrench turning provided by 2 Tightwads Racing.
Tune your own? Start here ----> Open Editor ---> Hit F1...READ!
READ SOME MORE (Thank username 69Lt1bird): http://ls1tuningguide.com/
Still lost? Consult a Pro!
www.thetuningschool.com
www.calibratedsuccess.com
www.tunedbyfrost.com
I now have it and my serial number but where do i get a password?
You need to use the <CREATE AN ACCOUNT> button in blue below the sign in section.
Janky Monkey Tuning
Call or PM for tuning solutions.
Cell 210-954-4985
Wrench turning provided by 2 Tightwads Racing.
Tune your own? Start here ----> Open Editor ---> Hit F1...READ!
READ SOME MORE (Thank username 69Lt1bird): http://ls1tuningguide.com/
Still lost? Consult a Pro!
www.thetuningschool.com
www.calibratedsuccess.com
www.tunedbyfrost.com
I borrowed a buddies gear to dabble on my car, then noticed our tahoe's speedo was out to lunch... does that meen I'm SOL for accessing the repository as well?
I was looking for a bone stock tune for our 2000 tahoe as its got some 'issues' from the previous owner... don't know what the hell they did, but idle @ 500rpm, timing seems pretty high compaired to my LS1 T/A (43-53º) and upto 4º of knock showing up while slowly accelerating in drive
Hoping to just revert to stock tune and see how it likes that for now.
If someone could help me out, that would be fantabulous.
I believe mine is on there in the 01's. Well my old one. If you wanted a updated one I would be more than happy to upload it for you.
Bolts ons, etc
cam/converter
cam= 224/224 .563/.563 114lsa
3600 Precision tq verter.
The SuperSlow Truck of MC-E
-01 4.8L Silverado 13.2@99 -- musclecarevolution.com
RIP Corey Shadd Burchfield -- On AIM: ITLStallion04
I am looking for one for an '05 LQ9. I got my VE and MAF tuned but would like to see what else others are tuning. I read you can pick up some part throttle power on the trucks.
thank you if you can help a noob
I tuned my brothers stock 2000 5.3 4wd silverado. I didn't change a whole lot, just timing, burst knock settings and some transmission stuff. Really the burst knock and torque management kills these trucks.
Does anyone know how long it takes them to approve files for the repository. I uploaded the stock tune for my C3 LQ4/4L65e as I thought it might be pretty useful to some people, but it hasn't shown up and it has been a couple of weeks.
Good One. Nice!
Spoken like a NON-HPTUNER OWNER.
I uploaded one for a Radix truck weeks ago and have not seen it or hear anything back yet.
Reply With Quote
