I have the stock 3.23 A4 rear. It is a heads and cam car with a 3000 yank stall and the rev limiter is set at 6700 rpms. I'm confused about the upshift and downshift tables. I am at work so I don't have the current settings. I have the stock table.
1-2 =38
2-3=76
3-4=125
2-1-28
3-2=70
4-3=123
I will update this post with the current settings. I have just been playing around with them for the best shift. However sometimes it will not downshift in the 90-110mph. So I may be looking at another problem than my playing around with the shiftpoints.
Any tips or sugestions?
Thanks