Black Box Dummy?...........

[CSC04]

OK, Well I just got my tuner and laptop all setup a few days ago and took some logs via the laptop no problem.
So onto standalone logging, I read everything I could and even went through the demo http://www.hptuners.com/help/demos/s...onelogging.swf a bunch of times. I cannot record? After I tell it to write config, I get a busy light about every 2-3 seconds....I hit record and nothing happens. Just the busy lighy I spoke of. No err light or anything else, I checked to make sure all PID's are supported and they seem to be.
Am I missing something?
TIA for any help. Sux being a noob.

[Bill@HPTuners]

Does the config write complete properly?

Did you hold in the record button for 2-3 seconds?

[CSC04]

Does the config write complete properly?

Did you hold in the record button for 2-3 seconds?

Yes says something like sucessfully written...
Yes I hold the button 2-3 seconds, and tried longer also.

[Bill@HPTuners]

I can have you send it into us for inspection if you'd like, simply contact support with your serial number & a link to this thread & I will get you the information.

-Bill

[CSC04]

I can have you send it into us for inspection if you'd like, simply contact support with your serial number & a link to this thread & I will get you the information.

-Bill

Thanks Bill, I contacted support with link to this thread.

I also tried this same thing using my 2000 Tahoe with the same results.

[The_Mailman]

I think you have to unplug it from your puter before pushing the record button don't you?

[CSC04]

I think you have to unplug it from your puter before pushing the record button don't you?

Yes, I unplugged it from my laptop before pushing record.

[Fox95]

CSC04, sounds like your just getting into the HPtuners world. Welcome.

Let me know if you need any help, I am in colorado springs as well and do GM and ford tuning using HPtuners.

Do you have any dyno runs on your car yet?

[bigbrian442]

This happened to me, all i had to do was remove and reinstall HPtuners. Worked perfect after that.

[CSC04]

CSC04, sounds like your just getting into the HPtuners world. Welcome.

Let me know if you need any help, I am in colorado springs as well and do GM and ford tuning using HPtuners.

Do you have any dyno runs on your car yet?

Thanks for the welcome, yes I am brand new to the HP tuners world, I was previously using the DHP PT.
I do not currently have any dyno runs yet on this car, but I would like to eventually. Maybe I can give you a holla for some hands on tuner tutorial?

Thanks
Shane-