Almost everytime I start up scanner and start to scan it will only grab half the parameters the first time. So I stop it and start a new scan and then usually one of the parameters is dead and reading a flat number. Then I have to stop and start it AGAIN before I can finally log everything. This gets REALLY annoying at the track when I'm about to make a pass. I have the new Beta version, but even the one before it did this also.
Also, either I'm the greatest tuner to ever live or my knock sensor values aren't working. I swear I can run my normal 17psi, run the afr up to 13.0 on my wideband, advance timing to 30 degrees at WOT and still see no recorded knock. Any ideas? It's a 2004 Ion Redline.