Any small tid bit of info on preparing a car (98modLS1,02 ECM) for a drag race only tune? Still experimenting, lookin' for the tenth.
Any small tid bit of info on preparing a car (98modLS1,02 ECM) for a drag race only tune? Still experimenting, lookin' for the tenth.
98 Camaro, LS1 built, P1SC, methanol intercooled, AFR 205 heads, 48lb injectors
2 bar speed density setup,LC-1, TH400, 3500 stall speed, gear vendor, built 9", . Just a drag car.
the dyno in pic load bearing?? and do you have constant access to it??
Disclaimer:The above comments are my opinion only and should be checked or verified BEFORE any action is taken based on said advice.
24/7, well, almost 8-5 mon-fri, having a FREEEEEE dyno day on 5/31, call to sign in 530-888-8862. Space is limited
Last edited by CTP Racing; 05-09-2008 at 12:10 AM.
98 Camaro, LS1 built, P1SC, methanol intercooled, AFR 205 heads, 48lb injectors
2 bar speed density setup,LC-1, TH400, 3500 stall speed, gear vendor, built 9", . Just a drag car.
Is it AWD.Originally Posted by CTP Racing
Sorry, 2 or 1 WD
98 Camaro, LS1 built, P1SC, methanol intercooled, AFR 205 heads, 48lb injectors
2 bar speed density setup,LC-1, TH400, 3500 stall speed, gear vendor, built 9", . Just a drag car.
It is a Mustang Dyno (not the car), controlled via computer, very advanced
98 Camaro, LS1 built, P1SC, methanol intercooled, AFR 205 heads, 48lb injectors
2 bar speed density setup,LC-1, TH400, 3500 stall speed, gear vendor, built 9", . Just a drag car.
Well then youve got the tools to tune it right!! LOL
Disclaimer:The above comments are my opinion only and should be checked or verified BEFORE any action is taken based on said advice.
Reply With Quote