Whats going on with my scanner or car??...i dont have any o2 info anymore and am getting all kinds of crazy ses codes after doing the mods listed below...and when i do get o2 values they are like 56 at idle....nothing works like it did before...when i open the number 4 histro to do a maf tune it comes up fine...but then when i start scanning it says it's not supported and wont show any info...then if i just want to see the table again i have to redownload the config file from hpt...(it's russ k's v6 config file)...but agian start to scan and bam it's gone...
1999 Silver GTP~HP Tuners~ZZP FS Intercooler~ZZP 78mm Billet Throttlebody~Coated Pacesetters~1.9 modified rockers~3.2MPS~#105 springs & retainers~PRJ fuel logs~2.5 off road DP~Ported & Polished S/C~JMB fwi ~Wrapped crossover~160* T-Stat~
everything worked fine before the mods and i have done a maf tune with that same config file and it worked fine also...i also got an incorrect gear ratio ses code and the damn thing wouldnt shift right...cleared and it hasent come back yet....look at the dtc's...the o2 values...somethins wrong...and i dont understand it