Can't get on it in 1st gear

[kawoods]

98 vette A4 TCI 3500 stall with Transgo...P1CS supercharger and modified bin


Turned off part of torque management.
Can't seem to be able to open the function under "Engine" "Torque Mgt"
"Max Engine Torque vs RPM vs Gear" to modify that table.

Anyways, car feels like the brakes are on in 1st gear....car won't move unless it it under pressure - around 2800 RPMS. Is this normal with the 3500 Stall?

Also throwing codes:

P0172 - Fuel Trim System Rich Bank 1 (Pending) (Current) (Immature)
P0175 - Fuel Trim System Rich Bank 2 (Pending) (Current) (Immature)
P0410 - Secondary Air Injection (AIR) System (Pending) (OLD) (Current) (Immature)
P0704 - Clutch Switch Input Circuit Malfunction (Pending) (OLD) (Current) (Immature)
P0801 - Reverse Inhibit Control Circuit Malfunction (Pending) (History) (Immature)

Once Per Trip Tests:
Catalyst - Incomplete
Heated Catalyst - n/a
Evaporative System - n/a
Secondary Air System - Incomplete
A/C System Refrigerant - n/a
Oxygen Sensor - Complete
Oxygen Sensor Heater - Incomplete
EGR System - n/a

Any Help please!

Thanks

Keith

[kawoods]

I see no one has staken a stab it this....It ends up that I had applied changes to the wrong bin file, which was a 98 M^ - NOT A4.

What gave it away was the "Trans Type 2" from the info dialog in the VCM editor.