I noticed during my scans today that I am not getting above 100 kPa. I also looked back and scans that I know were above 100kPa display incorrectly as well. It seems that the columns got shifted to the left.
Is there something that I changed without knowing?
2004 GTP: 3.8L SC, XP CAM, 85MM Maf, 105# Springs, 3.3" Pulley, Autolite 103's K&N CAI, 3" Downpipe: TOG Headers, #39 Cobra Injectors, ZZP Crate motor with CNC Ported Heads, NGK AFX Wideband
Posting the scanner log in question would be your best bet. My feeling is you have a custom PID setup incorrectly & is skewing your map readings, more than likely something setup as PSI & being your map sensor, but I'll reserve my assumption until you post your scanner log.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Here is the log and the config.
2004 GTP: 3.8L SC, XP CAM, 85MM Maf, 105# Springs, 3.3" Pulley, Autolite 103's K&N CAI, 3" Downpipe: TOG Headers, #39 Cobra Injectors, ZZP Crate motor with CNC Ported Heads, NGK AFX Wideband
yup, reads fine for me, you have a custom pid that is not setup correctly.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Bill you rock. I had the boost pid in there. I removed it and all is good.
2004 GTP: 3.8L SC, XP CAM, 85MM Maf, 105# Springs, 3.3" Pulley, Autolite 103's K&N CAI, 3" Downpipe: TOG Headers, #39 Cobra Injectors, ZZP Crate motor with CNC Ported Heads, NGK AFX Wideband
Reply With Quote