Results 1 to 10 of 10

Thread: .cfg files

  1. #1
    Tuner in Training srcracing's Avatar
    Join Date
    May 2008
    Location
    Boca Raton, Florida
    Posts
    31

    .cfg files

    Does anyone have any .cfg files for data logging LB7 vcm.
    George Landis
    SRCRACING.COM
    [email protected]
    tuner/racer/fabricator

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,266
    There haven't been any posted to the repository so for now you'll need to start from scratch but your more than welcome to post what you come up with either here or in the repository at the top of this section.

    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Tuner in Training srcracing's Avatar
    Join Date
    May 2008
    Location
    Boca Raton, Florida
    Posts
    31

    .cfg file

    Here's what I have so far... Can't get the histogram to work, axis scaling comesup on 8 & 9 but still has the text in the graph. What am I doing wrong?
    George Landis
    SRCRACING.COM
    [email protected]
    tuner/racer/fabricator

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,266
    Hard to tell without you posting a cooresponding scanner log file .hpl
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    Tuner in Training srcracing's Avatar
    Join Date
    May 2008
    Location
    Boca Raton, Florida
    Posts
    31

    file

    here's a couple of data logs, I was working on MPG, so there isn't alot of rpm changes
    George Landis
    SRCRACING.COM
    [email protected]
    tuner/racer/fabricator

  6. #6
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,266
    #8 doesn't work because you aren't logging main fuel rate from what I can tell.

    #9 doesn't work because you aren't logging baro, if you want it mapped against map then you'll need to find a different table to map it against or simply make a custom histogram to fit your needs. like the one below

    Making histograms is just about being logical in what you are doing, if you want to map against map then log map, if you want to log against baro you better be logging baro.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  7. #7
    Tuner in Training srcracing's Avatar
    Join Date
    May 2008
    Location
    Boca Raton, Florida
    Posts
    31

    atest

    here's my atempt at a few histograms, see if you think these will work. I'm going to try them later today.
    2002 C-3500 duramax LB7
    OS 15094441
    TCM OS 15079907
    VIN 1GCJC33192F162789
    George Landis
    SRCRACING.COM
    [email protected]
    tuner/racer/fabricator

  8. #8
    Tuner in Training srcracing's Avatar
    Join Date
    May 2008
    Location
    Boca Raton, Florida
    Posts
    31

    latest .cfg

    I made some changes to the chart section, going to test tonight.
    George Landis
    SRCRACING.COM
    [email protected]
    tuner/racer/fabricator

  9. #9
    Tuner in Training srcracing's Avatar
    Join Date
    May 2008
    Location
    Boca Raton, Florida
    Posts
    31

    latest logs

    Here's a couple of logs from last night. I still have a few problems, 2 with my histograms, I tried to follow Bill's boost histogram but I'm still missing something, also, I have a couple of charts that aren't working. What am I missing?
    George Landis
    SRCRACING.COM
    [email protected]
    tuner/racer/fabricator

  10. #10
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,266
    Quote Originally Posted by srcracing
    I still have a few problems, 2 with my histograms, I tried to follow Bill's boost histogram but I'm still missing something, also, I have a couple of charts that aren't working. What am I missing?
    What are you having issues with?

    If you are referring to your #2 histogram its because you are trying to somehow map spark timing which diesels don't have spark timing
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"