The repository only has a stock calibration, unfortunately. Is there anybody out there with a tweaked calibration for a mostly stock G8 GT? A local guy is wanting some tuning done on his G8, so I wanted to see what people have changed in the tune. He said he's going to do an intake and full exhaust eventually, but I'll deal with that when it happens. I tuned my own car (big cam LS7), but the fact that drastic changes were needed made it easier to tell what had to happen... I've never had to really play with a stock car. WOT is the easy part. Basically, I'm just looking for the limitations for this guy because he wants to switch over and run 93 octane all the time, but I don't know anything about the L76 as far as what it likes for timing.
On another note... I've never had to mess with an auto car before. Is there a way to force the transmission into a gear and lock the torque converter through the scanner? This would be for dyno pulls. I don't have my laptop or interface right now, so I can't load it up and check to play with it.