Read and programmed then security access denied invalid authorization code

[ProTools4]

Back at it again.

STill Stuck!

-Dealer Reflashed
-New PCM
-Dealer Reflashed again
-Made new file from dealer flash
-using a different laptop
-New usb cable
-Charged Battery on lappy and truck

Every time the car will take the first Write Entire for RTT.
The second Write Cal is always security access denied - invalid authorization code

Attached is the dealer flash and my edit to RTT.
This tune is just a work in progress to just back the car on te dyno so please do not pick on it too much.

The question Why am I locked out yet again?

[Bill@HPTuners]

Is this that same information you send me the other day? I guess you were able to access it using the beta version I sent you that worked the last time?

The Josh04RTT.hpt file looks different from the files you sent me recently so I'm a bit confused as to what happened that day since you never got back to me.

[Chris@HPTuners]

if you are still using the beta version that was used to recover your previous corrupt pcm file then you will see this problem. You need to make sure you are not using that special beta version as it will not work correctly with regular 2bar files.