Page 20 of 20 FirstFirst ... 101617181920
Results 381 to 398 of 398

Thread: Truck Owners

  1. #381
    Tuner
    Join Date
    Mar 2022
    Location
    Florida
    Posts
    134

    Converter o

    Update, the CircleD converter won?t be in for another month so I dropped the exhaust and welded in the bung for an AEM 300 WB. Got it working and now I?m working on making a custom air intake including a bit larger MAF housing. I?ll be tuning the MAF when I finish it and install it.
    2017 Silverado 3500HD WT 6.0 flex fuel 6L90 6800lbs E78 T43

    --- What am I doing??? Why did I do that??? ---

  2. #382
    Potential Tuner
    Join Date
    Dec 2021
    Posts
    6
    New to the site.
    Just bought a new MPVI2+ to tune my 2007 Tahoe LTZ 5.3L 4x4.

    Engine: Built 5.3L, Balanced, 3.80" custom Wiseco Forged Flat top Pistons, Eagle Forged H-beam Rods, BTR Stage 2 truck cam, DOD delete.
    Intake/exhaust: OE Truck (TBSS) intake, Volant Cold Air intake, JBA headers, Flowmaster cat-back exhaust
    Fuel: Walbro 470, Holley fuel rails, Aeromotive FPR, 8AN feed and return
    Swapped: 6L80e Trans - Circle-D Lvl 3, Circle-D Billet TC
    Cooling: Holley "Frostbite" radiator, Silverado oil cooler lines to radiator, Tru Cool Max 40k stacked plate trans cooler.

    Not quite back on the road yet. Just fired her up the first time this weekend. Still have some kinks to work out and then tune the engine/trans.
    Last edited by testa_rossa; 05-16-2022 at 08:10 PM.

  3. #383
    Tuner in Training
    Join Date
    Nov 2022
    Posts
    17
    Here. here......Baytown, Texas
    2005 Silverado 2wd Crue Cab, Daily Driver
    2005 370" LQ4, BTR Truck Torque Cam, 202/202, .511/.511 111
    LS6 Springs, LS7 Lifters, Trunnion upgrade
    Speed Engineering HAI, Stock exhaust with 3" I/O Flowmaster
    New 4L65E

    2005 Cadillac CTSV TT, Too much to list.....lol

  4. #384
    Tuner in Training BackWoodsBandit's Avatar
    Join Date
    Mar 2022
    Posts
    12
    2013 NNBS heads, cam, headers, cai, 6l80, my DD

  5. #385
    Potential Tuner
    Join Date
    Dec 2022
    Posts
    2
    2012 Silverado LTZ 7.5? Lift with 24s on 35s

  6. #386
    Potential Tuner
    Join Date
    Sep 2023
    Posts
    3
    New to this as I just got my software and have been playing with it. I have a 1984 c10 that I have LS swaped with a LY6 6.0 and a 6l90e out of a 2009 2500.Its tough finding info on what to tune on the gen 4 all i am finding is the older pcm for torque control mangement and the settings are no where near the same. Once I get it running my goal is cam it and play with the tune some more.

  7. #387
    Tuner in Training
    Join Date
    Jul 2010
    Location
    Illinois
    Posts
    16
    I have a couple trucks....

    2014 CCSB - long tubes, cat back, CAI
    2003 RCSB - project-- cat back, CAI
    1996 RCSB - project -- Doing 5.3 swap currently, lowering, brake upgrades,

  8. #388
    Potential Tuner
    Join Date
    Oct 2023
    Posts
    3
    Greetings all,

    2004 Cadillac Escalade LQ9 6.0L all stock right now...

    2006 Cadillac Escalade ESV (due to a series of unfortunate events, relegated to parts truck)

  9. #389
    Tuner in Training
    Join Date
    Sep 2021
    Posts
    15
    Hey everyone,
    2000 GMC sierra 1500 2wd
    p01 ecm, gen3 4.8 with gen 4 rods, th400 swap, single turbo, btr cam

  10. #390
    Potential Tuner
    Join Date
    Sep 2023
    Posts
    1
    08 btr cam here still learning ... need help

  11. #391
    Potential Tuner
    Join Date
    Jun 2023
    Posts
    1
    - 21' Silverado 2500HD High Country
    - 6.6L Duramax L5P
    - 10 speed Allison tranny
    -S&B cold air intake
    - 64 mm stealth exhaust
    - Full delete
    - 5" straight pipe down pipe back
    - 3.5" down pipe
    -37"x13.50" Ironman tires on 20"x10" rough country rims
    - 7" lift
    - 5 SWTF tuned
    - Fleece high performance fuel/water separator
    This is the start of my project still have plans to upgrade the tranny, high flow fuel pump, upgrade the injectors, coolant pipes, trans intercooler, just kinda been learning as I go.... SMH definitely appreciate you guys that have real knowledge and experience messing with this stuff... Im always open to learn and would appreciate any formation shared.

  12. #392
    Tuner in Training
    Join Date
    Mar 2023
    Location
    Griffin Ga.
    Posts
    29
    2018 1500 LTZ 5.3 Z71
    STG 1 Cam
    Cold Air Intake
    6.2 Intake and TB
    Shorty Headers
    AFM Delete with Trunion Upgrade

  13. #393
    trucks is all I do.

    03 escalade ext (fresh winter rig as of 3 weeks ago)

    17 silverado 2wd/rcsb, L83, c8 manifold/tb, 250 shot.

    17 silverado 4wd/ccsb L83, kooks longtubes, circle D 3200, dr. steves lvl3 6l80e.

  14. #394
    Potential Tuner
    Join Date
    Dec 2022
    Location
    Oklahoma
    Posts
    5
    Trucks and cars in our fleet. 2007 CCSB 4x4 LBZ - some mods and my tune, 2007.5 CCFB 4x4 LMM - Some mods and my tune, 2016 Chevy SS (Holden Commodore) 6.2L with mods, built Tim King 6L80 and custom flex fuel tune, 2000 Silverado 5.3 Ext Cab 2wd with my tune on it. We also use VCDS for our multiple VW TDI's and we use VF Tuner for our 5th gen 4Runner tunes.
    Horsepower is like a condom. I'd rather have it and not need it, than need it and not have it.

    Disclaimer: I do not know what I'm doing. Follow at your own risk.

  15. #395
    Advanced Tuner Rockrz's Avatar
    Join Date
    Aug 2008
    Location
    I'm right here!
    Posts
    261
    I'd like to find a mild tune in the repository for a stock 2011 Silverado 5.3, 6 spd Auto, 2WD

    If anybody runs across one, please let me know how ro find it once I'm logged in to my HP Tuners account

    I just wanted a mild tune with AFM turned off, rev limiter turned up so I can go over 100 MPH when the need arises (can't never tell when you'll have the need to go over 100 ya know )

  16. #396
    Dakota rt gt45 8psi
    2000 Dakota R/T
    gt45
    42lb
    honda map
    8psi

  17. #397
    Tuner in Training
    Join Date
    Jul 2020
    Location
    tn
    Posts
    40
    03/04/06 all modded and tuned to some extent

    now anybody got a good starting tune for 228/242 cammed 427 with ls3 heads since that's going in my stepside in a month or so,,, ?

  18. #398
    Potential Tuner
    Join Date
    Feb 2024
    Posts
    4
    havent done any "tuning" yet, but hopefully soon....

    '02 1500HD
    6.0 LQ4
    4l80E
    14bolt FF rear 4.10 / Detroit Trutrac