Page 91 of 115 FirstFirst ... 4181878889909192939495101 ... LastLast
Results 1,801 to 1,820 of 2289

Thread: Introduce yourselves here..

  1. #1801
    Tuner in Training
    Join Date
    Nov 2018
    Location
    Mountain Home, AR
    Posts
    12

    HP Tuner programming problem. Do i have to much timing in my HPT file?

    Long time user of HP Tuners software. Have used it since 2016 or so with NO problems. Now, i have serious engine problems and my engine builder thinks i have to much timing dialed in.

    Would someone look at the hpt file and advise me what i need to do if there is too much timing in the file.

    Installing my 4th engine soon, hate to junk this motor before i get a chance to show it off...

    Nick
    Attached Files Attached Files
    Last edited by Nick Goodrich; 11-01-2020 at 11:12 AM.

  2. #1802
    Tuner in Training
    Join Date
    Nov 2018
    Location
    Mountain Home, AR
    Posts
    12
    would you take a minute to look at my tuner file? my engine builder thinks i am running to much timing...

    Nick
    Attached Files Attached Files

  3. #1803
    Hello all. I Tong Mr.lexus toyota for thailand. i profesional electical and electronic sytem for toyota lancruiser and lexus I'm a newbie to HP Tuners I just got the MVPI2.you need help. [email protected]

  4. #1804
    Potential Tuner
    Join Date
    Nov 2020
    Posts
    1
    I graduated with a BS in Computer Engineering.

  5. #1805
    Potential Tuner
    Join Date
    Nov 2020
    Posts
    1
    How is everyone. Name is Carlos, have been down the LS route as you can see by my profile pic. That was an 02 C5 auto with H/C/I/E and 150 N2O 540 rwhp on a mustang dyno. That was my last toy which I sold back in '12. I picked up a '14 Challenger 5.7 A5 and I am good with wrenches but looking to get into the tuning side of the house. Want to take in as much info as I can so when I decide what my rout will be either upgrading the 5.7 or an engine swap I can take care of all tuning needs for myself. Glad to be part of the group.

  6. #1806
    Potential Tuner
    Join Date
    Nov 2020
    Posts
    1
    Gary from Lakeland Florida. Howdy!

  7. #1807
    Potential Tuner
    Join Date
    Nov 2020
    Posts
    2
    Hello all. Just picked up HPT on a recommendation from a friend because I just did an LS swap on a 2004 Colorado and it would help me going forward.

  8. #1808
    Tuner in Training
    Join Date
    Nov 2018
    Location
    Mountain Home, AR
    Posts
    12

    HP Tuner programming problem. Do i have to much timing in my HPT file?

    please look at my hpt file and let me know if the timing is to far advanced... thanks in advance...
    Attached Files Attached Files

  9. #1809
    Potential Tuner
    Join Date
    Nov 2020
    Posts
    2
    Hello, my name is Pete. I was looking at the trans tables concerning the transmission, a 6l80, on my 2014 GMC Sierra, and noticed there is a setting for Mountain Mode, that is showing it is disabled. I going to have an email tune done soon, and I asked my tuner if this would be a good option to activate during the tune. They said that they are not familiar with this setting. I live in a mountainous region in Western Pennsylvania, so I was wondering if I should have this done. Has anybody ever tried this before. Is this for highway driving or off road only.

  10. #1810
    hello quick question here i recently swapped 5.7 over to 6.4 hemi and need to update the pcm and there is a file here i got from repo, but when i try to upload it to the truck its asking me to buy more credits is this because i have to buy the tune then i am able to upload first time this has happened?

  11. #1811
    Potential Tuner
    Join Date
    Sep 2020
    Location
    Winchester, VA
    Posts
    1
    Hello,
    My name is Bruce and I am very new to tuning and as of now am just trying to tune my private vehicles , 2011 corvette Grand sport A6 and a 2017 Silverado 6.2 ltz z71 auto.
    hope I can find the info I need on here. Thanks in advance for your help.

  12. #1812
    Potential Tuner
    Join Date
    Nov 2020
    Posts
    3
    Bonjour
    je m'appelle steven g?rant de la soci?t? performance 33 bas?s a bordeaux
    nouveau sur ce forum je feras de mon mieux pour m'investir.
    je poss?de une ford mustang shelby GT500 et un audi S5 au plaisir d'?changer avec vous

  13. #1813
    Potential Tuner
    Join Date
    Dec 2020
    Posts
    1
    Mechanical Design Engineer. Diesel Mechanic. Tuning Technician
    The Island Tuner 🌴

  14. #1814
    Potential Tuner Jugadan's Avatar
    Join Date
    Dec 2020
    Location
    Santa Clara
    Posts
    1
    Hi all, I'm Richard from Santa Clara.

    I'm the owner of Audi A3, I bought it after winning on the Quatro casino, you can read their review on this page https://bestcasinos-ca.com/reviews/quatro-casino.php, it's good casino for players from Canada.
    Last edited by Jugadan; 12-29-2020 at 09:15 AM.

  15. #1815
    Potential Tuner
    Join Date
    Dec 2020
    Location
    Montana
    Posts
    1
    I am looking for someone to help in an Ecotec 1.4t engine conversion. I am putting one in a 1974 fiat and need help getting the engine running. Any help would be appreciated and compensated

  16. #1816
    Potential Tuner
    Join Date
    Dec 2020
    Posts
    6
    Hello,

    My name is Chris. I am new to HP Tuners as of this weekend. I look forward to learning the HPT platform and becoming an experienced tuner within time. Thanks for having me here.
    Last edited by The Cleaner; 12-08-2020 at 12:17 PM.

  17. #1817
    hi all my name is brandon i live in kingman az and am the manager of the kingman glass doctor. i have 30 years in the glass industry so if anyone has a question regarding glass i have the answer. i recently purchased a 2014 chevy ss. it is my dream car but im finding out that its costing me alot. bought used from phoenix and it apparently is tuner locked. i submitted a ticket and chris from hp said that there are tuners on the forum that can unlock my ecm. anyone out ther that can help?

  18. #1818
    Potential Tuner
    Join Date
    Dec 2020
    Location
    Colorado
    Posts
    1
    Hi, new to the forum not to hptuners though. Owner and operator of a small paint and performance shop in colorado.

  19. #1819
    Potential Tuner
    Join Date
    Dec 2020
    Location
    Pittsford NY
    Posts
    9
    Names Mike, I started into ecu diagnostic and tuning on vws and Audis in my late teens. Have used Ross-tech and nefmoto for diagnostics (nefmoto for both diagnostic and flash) and have experience building my own files for Bosch motronic. I took a decent hiatus from tuning and am looking to get back into full time.

  20. #1820
    Potential Tuner
    Join Date
    Dec 2020
    Posts
    5
    Hey everyone my name is Corey, I currently live in the suburbs of Chicago but will be moving very shortly due to work. I have been a gearhead since a very young age due to growing up at the drag strip every weekend. Now that has turned into a passion previously have used efi live and mm3 software and many others in the industry. My passion for tuning started back in 2010 when I bought a LBZ duramax. Now I have been working on many LS projects and I am currently building a 5.0 twin turbo hence the username.
    CM Motorsports