2.5 SD new applications

[NICKY BOY]

i heard that HP now has custom 2.5 OS for 08 09 C6 (07 already available) and not just base model.
so i guess that leaves out the 06 year

[Bill@HPTuners]

06's have a minimal amount of requests and thus the ones with higher requests were tended to first. That doesn't mean no 06's will be done but it probably won't be for another couple of months more than likely.

[NICKY BOY]

06's have a minimal amount of requests and thus the ones with higher requests were tended to first. That doesn't mean no 06's will be done but it probably won't be for another couple of months more than likely.

perfectly understandable....so the other are out?

[Bill@HPTuners]

Yes.

[lito]

Is this upgrade available for the '07 Z06?

if so, that would give a new limit to MAF's lb/min and the IFR lbs/hr do we won't have to scale?

[Bill@HPTuners]

Is this upgrade available for the '07 Z06?

if so, that would give a new limit to MAF's lb/min and the IFR lbs/hr do we won't have to scale?

We added it to the os's listed here http://www.hptuners.com/forum/showpo...1&postcount=20 if its one of them then the custom os has been added for it.

It doesn't rescale the ifr table though.

[DSteck]

06's have a minimal amount of requests and thus the ones with higher requests were tended to first. That doesn't mean no 06's will be done but it probably won't be for another couple of months more than likely.

[RWTD]

It doesn't rescale the ifr table though.

Yeup, and until that happens, the A6 cars are going to continue to have "some" issues, due to the reported airflow and estimated torque calculations.

Hey, Bill, on a side note, when is that next beta gonna be finished, bud? I'm still awaiting that "fix" where Chris forgot to include the MAF table extension for my '08 Z06 on the last beta. Thanks!

[Bill@HPTuners]

Responded in the other thread bud.