Yea i have had no luck with this 64bit stuff. It worked fine until repairs now it is my enemy so ill dual booting good ol xp on an extra drive. If anyone has a "for sure" way to use 64 bit ultimate to work PM me. Thanks.
2006 SS Cobalt SC
Stage 2 ZZP Cams
Headers, 3.0" Full ZZP Exhaust
60lb inj. Intake.
2.8 Pulley
72# Lb. Supertech Springs
LNF Ext Valves and lashers
Cobre H/E, option B.
Torque Damper
HPTuned.
Bitchin'.
Didnt the f8 thing work?
You should be able to create a signed driver by following this guide:
http://www.minasi.com/newsletters/nws0903.htm
Once the driver is signed you will have to import the certificate on your machine that matches the driver. Unless HPTuners wants to purchase a priv/shared certificate that someone can use.
If I have some time I'll try to get this done, but I'll be pretty busy the next couple of weeks.
Bill I used the direct link I posted in a couple of the other threads to install the drivers onto my computer. But before you install these drivers using the *.EXE file you MUST uninstall the drivers you currently are trying to use. Then run the *.EXE file and then go about installing the suite like normal. It has worked on my computer and I didn't do any F8 trick's or disable any digital driver signing to make it work.
I currently run this software on 3 different laptops and I am currently using a HP Mini running XP sp3... When I can get back to my other computer that runs Vista 64-bit I will completely unistall everything and try to make a video tutorial of installing the drivers and then the software. May take a few weeks to make where I'm pretty busy these upcoming couple weeks.
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
yea a video of it would be the best bet.
Finally
Last edited by TXZ0603; 06-04-2009 at 06:13 PM.
2003 Z06
Forged 347
PTE Billet 67/65 Turbos
FMIC / Dual 50mm Tial BOV's
ID 1000 Injectors
RSI Stage 4 Fuel System
07 Z06 Cam
Tripple Nozzle Meth
ACT Twin disk clutch
25# Boost
well fark! it only works with the f8 when it want to! is there anything else to get this stuff to work? Need to tune my car.
2003 Z06
Forged 347
PTE Billet 67/65 Turbos
FMIC / Dual 50mm Tial BOV's
ID 1000 Injectors
RSI Stage 4 Fuel System
07 Z06 Cam
Tripple Nozzle Meth
ACT Twin disk clutch
25# Boost
Sorry still no luck on the video... my fiancee' has pretty much taken the new laptop and called dibs on it so I rarely ever get on it. I know alot of people are still having issues even with the exe file that I linked. What you must do is make sure that all drivers are deleted. I've had usb->serial drivers like ftdi.sys really screw with my hptuners drivers as well so keep that in mind as well. If you try the method I posted above and it still doesnt work then you will need to find the location that the .exe file installs the drivers and manually select that driver location and install the cable drivers from there.
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
What exactly do we need IN the video? If its just a walk thru of the (2) methods on the threads previous page (1) instructions I can do that tonight. Even the whole unistall drivers option mentioned by LSxpwrdZ can be included. Anyone have hosting space for it?
Janky Monkey Tuning
Call or PM for tuning solutions.
Cell 210-954-4985
Wrench turning provided by 2 Tightwads Racing.
Tune your own? Start here ----> Open Editor ---> Hit F1...READ!
READ SOME MORE (Thank username 69Lt1bird): http://ls1tuningguide.com/
Still lost? Consult a Pro!
www.thetuningschool.com
www.calibratedsuccess.com
www.tunedbyfrost.com
i just purchased an asus laptop, on startup did f8 and it brought me to a screen that had load safe mode, etc. On the bottom it said load drivers without digital certificates. I selected that loaded the driver and no issue's so far.
Janky Monkey Tuning
Call or PM for tuning solutions.
Cell 210-954-4985
Wrench turning provided by 2 Tightwads Racing.
Tune your own? Start here ----> Open Editor ---> Hit F1...READ!
READ SOME MORE (Thank username 69Lt1bird): http://ls1tuningguide.com/
Still lost? Consult a Pro!
www.thetuningschool.com
www.calibratedsuccess.com
www.tunedbyfrost.com
well f8 wont even work for me now. dont know why but I have ZERO acces to my car through hptuners. Is there a definitive fix for this or do i need to sell my new laptop and buy another new laptop just to run this? How do you manually uninstall drivers? where are they located??
2003 Z06
Forged 347
PTE Billet 67/65 Turbos
FMIC / Dual 50mm Tial BOV's
ID 1000 Injectors
RSI Stage 4 Fuel System
07 Z06 Cam
Tripple Nozzle Meth
ACT Twin disk clutch
25# Boost
Janky Monkey Tuning
Call or PM for tuning solutions.
Cell 210-954-4985
Wrench turning provided by 2 Tightwads Racing.
Tune your own? Start here ----> Open Editor ---> Hit F1...READ!
READ SOME MORE (Thank username 69Lt1bird): http://ls1tuningguide.com/
Still lost? Consult a Pro!
www.thetuningschool.com
www.calibratedsuccess.com
www.tunedbyfrost.com
Thanks Bro!!!!!
That worked most excellent
2003 Z06
Forged 347
PTE Billet 67/65 Turbos
FMIC / Dual 50mm Tial BOV's
ID 1000 Injectors
RSI Stage 4 Fuel System
07 Z06 Cam
Tripple Nozzle Meth
ACT Twin disk clutch
25# Boost
So is everyone still doing the F8 thing?
My current laptop wont charge the battery. I thought about buying a new 10", but if you guys are still having problems, I'll just put a new motherboard in this one.
Tony
05 CTS-V l LS6 l Maggie l Magnaflow Cat-back l Meth l 439rwhp/414rwtq
Thank you for this post. F8 worked great, spent over 2 hours jacking with this. Is Windows 7 going to be this hard? My laptop is getting ready to go out to pasture and I hope it is not hard on the next gen OS. HP Tuners needs to play a little catch up on Windows OS vs: software compatibility.
My windows 7 beta edition required the same methods so far.
Janky Monkey Tuning
Call or PM for tuning solutions.
Cell 210-954-4985
Wrench turning provided by 2 Tightwads Racing.
Tune your own? Start here ----> Open Editor ---> Hit F1...READ!
READ SOME MORE (Thank username 69Lt1bird): http://ls1tuningguide.com/
Still lost? Consult a Pro!
www.thetuningschool.com
www.calibratedsuccess.com
www.tunedbyfrost.com
I read some where that we can create a .bat (batch) to automaticly do the F8 & Turn Off Function at every start up.
I have been researching this every day but i dont know how to write the .bat file to do such.