How do I set up a MPVI Pro to log the selected gear on my A6?
I don't see a PID for selected gear.
How do I set up a MPVI Pro to log the selected gear on my A6?
I don't see a PID for selected gear.
Thanks but why don't these show up if I am not connected?
2009 Cyber Gray C6 Coupe, A6, F55 Shocks, Z51 Brakes
Halltech Killer Bee, Comp Springs, Kooks 1.75 Long Tube Headers, Random Technologies Cats, .25" Tunnel Plate, RPM 3.42 Rear, 2600 Stall TC.
If your not connected the scanner doesn't know what peramiters to load. Its sensing which car its supposed to scan as its connecting. Switch vehicles sometime and watch as it goes thru a series of screens to load vehicle configuration. It will load relevant tables per year/make/model if available.
Janky Monkey Tuning
Call or PM for tuning solutions.
Cell 210-954-4985
Wrench turning provided by 2 Tightwads Racing.
Tune your own? Start here ----> Open Editor ---> Hit F1...READ!
READ SOME MORE (Thank username 69Lt1bird): http://ls1tuningguide.com/
Still lost? Consult a Pro!
www.thetuningschool.com
www.calibratedsuccess.com
www.tunedbyfrost.com
I have the trans gear logging but the number displayed when it changes from one gear to the next is 12 or 15, so it will show say gear 1 then as it changes it shows 15 then shows gear 2. Any idea why?
Thanks, Steve