New 2010 V6 Camaro Support?

[Baldturbofreak.com]

If its E69 its in the same boat as the E69 in the 08+ CTS unfortunately as we haven't even written the bootloaders for it

On the bright side, you get 2 birds with 1 stone.

[Bill@HPTuners]

On the bright side, you get 2 birds with 1 stone.

More like 1 1/2, 08+ 3.6 CTS's use two different pcm's both of which aren't supported so even if we get the E69 supported we still need an E77 from one that doesn't read so we can try to figure that out.

[Xanthos]

I also wanted to voice my support of this - and point out that I, and many others, would be happy to see this even if it meant paying a little bit more than most tunes because of the extra development cost.

I really think this will be a big seller. The V6 in this car is not like older V6s - there will be a lot of people putting performance parts on it, and at a certain point a tune becomes a must.
- X

[monaro327]

i know alot of commodore owners have been waiting for this for years now.

[Chris@HPTuners]

the issue relates to the reading of the ECM and it varies between operating systems. It affects some E77 and most E69 ECM's that we can tell. Hopefully we can come up with a way forward atht doesn't require reading the ECM over 2 hours... *sigh*

[Venom40k]

I also wanted to voice my support of this - and point out that I, and many others, would be happy to see this even if it meant paying a little bit more than most tunes because of the extra development cost.

I really think this will be a big seller. The V6 in this car is not like older V6s - there will be a lot of people putting performance parts on it, and at a certain point a tune becomes a must.
- X

+1

[scrming]

good enough?

[Mojave]

Can you give me the email address of support so I can send a picture of my 2010 Camaro PCM

Contact support with pic's of your pcm's so we can confirm what pcm they have for starters.

[Mojave]

and mine

[Bill@HPTuners]

thanks guys, yah same pcm as the cts, likely be a while

[GM4life]

thanks guys, yah same pcm as the cts, likely be a while

Humm I have a 2009 G8 with the LY7, I'll be on the look out.

[Broncho81]

At the very least, I would like a tuner to have the ability to: 1. Remove the torque management. 2. Adjust for gear changes,tire sizes,etc. 3. Increase engine torque at lower RPM's.


Thank you

[Silverbird]

At the very least, I would like a tuner to have the ability to: 1. Remove the torque management. 2. Adjust for gear changes,tire sizes,etc. 3. Increase engine torque at lower RPM's.


Thank you

+1 - got a lot of V6 5th gens asking for basic tuning . If there is a Beta ever in the works Id love to play =)

[darkhorizon]

I can tell ya right now, the only reason I would buy a camaro would be to get one of these v6 cars and put a giant turbo setup on it.

I know the motors are ready for some extra power, and by the time you have the tuning unlocked, there will be a decent ability to upgrade the direct injection system, so the tuning side of things needs to be locked in before the injection modifications are made.

if it is anything like the saab DI + stock turbo setup, then there should be plenty of room in the DI system currently, at least enough to keep up with a SS LS3 camaro.

[Mobile Chassis Dyno]

I need support as soon as yesterday

[Mep_q8]

ive been able to scan one but not read :/

[Zi5]

Any update ?

[Bill@HPTuners]

No update, haven't had a chance to look into them any further & likely won't be able to for some time.

[Zi5]

Hello Bill ,
I think you know that we are waiting for the e77 reading since 2007 right ?

[Bill@HPTuners]

Hello Bill ,
I think you know that we are waiting for the e77 reading since 2007 right ?

Ok and??? there are alot of people waiting on tuning options, doesn't mean we have the resources to look into it any further, just means they are waiting. One of our customers was nice enough to send us an E77 pcm recently so hopefully that will speed things along but no guarantees at this point other than at least we finally have one of the pcm's at our disposal.