Idiots Guide to Injector Flowrate Changing

[itsn8dog]

Hello all,

After updating to release 1.5, I took a look at the injector scaling. It seems to be a tool that compensates fuel line pressue, with flow @ rated pressue. I have Lucas 42.5lb/hr injectors that replaced the stock 36lb/hr injectors.

My changed table looks like this:

VAC	0	10	20	30	40	50	60	70	80	90	100
lb/hr	42.5	42.91	43.43	44.16	44.31	44.39	44.44	44.5	44.54	44.68	44.8

And my stock table looks like this:

VAC	0	10	20	30	40	50	60	70	80	90	100
lb/hr	36.10	36.51	37.03	37.76	37.91	37.99	38.04	38.1	38.14	38.28	38.4

Was I correct to add 6.4lb/hr (42.5lb/hr - 36.10lb/hr) to the table?
I am using the standard, 43.8psi for rating, and 43.8psi for my current fuel pressure.

[itsn8dog]

anyone :huh2: ??? :-[ :-X :'( :'( :'(

[Missing2]

That would be incorrect...

you want the ratio not the difference..

then multiply the whole table by the ratio..

{existing table] * (new flow/old flow)

or something like that.. that how i would approch it to start.. then tweek from there..