Tuning a friends 98 Trans am, and followed the tuning school book to the letter, it now takes a long time, ( longer than my 95 grand marquis) to downshift and go after mashing the throttle at normal cruising speed 35-65 mph.
any suggestions?
THanks!
Tuning a friends 98 Trans am, and followed the tuning school book to the letter, it now takes a long time, ( longer than my 95 grand marquis) to downshift and go after mashing the throttle at normal cruising speed 35-65 mph.
any suggestions?
THanks!
can you post up your tune.
Ian
2008 Corvette A6 - Comp Cams 231/239 617/624 109 ICL 113 LSA, Patariot Extreme Dual Springs .660", Milled .30" Stock LS3 Heads, Mahle -4cc pistons, FTI 3600 Converter, 1 7/8 kooks cat-less 3 inch X-Pipe, air raid intake, ported TB, SLP Loudmouth I. 512hp/464tq
2011 Ford Taurus SHO - stock with just a Tune
I can but it will be late tonight as I'm away from the tuning computer at this point
here is the tune. Thanks guys
Under transmission management, abuse mode torque reduction and Torque reduction normal. Zero out these tables.
Thanks! I'll give that a try next time i can see his car.
The trans/torque management/general Desired torque.. should be 0? or a higher number than possible. ???
Leave desired torque at zero.Originally Posted by Y2K WS6
Just wanted to say Thanks for the help everything worked well!
Reply With Quote