cot on/off?

[Bill@HPTuners]

i noticed there no on/off cot like for v8's...what have you guys done to counteract that?

[Chris@HPTuners]

there is supposed to be an enable temp, that appears to be broken.

let me check it out.

Chris...

edit:

If you set the COT AFR higher than your PE (ie. 14.7 across the table) it should effectively disable it as well. As the PCM will always use the richest.

Regardless i will fix the enable temp.

[Little_G]

When I set the A/F to 14.7 on the COT table the car wouldn't run. I set it to 12.7 where it dropped below 13 and it ran fine. Shaved two tenths off ET. A master on/off switch would be ideal though.

[97GTP]

What does this do for you?

[Missing2]

A master on/off switch would be ideal though.

I concur,

"Make it so" -picard



:huh2: i dont even really watch star trek..


ohh well.. add it to the features to add for the next release

[Bill@HPTuners]

I concur,

"Make it so" -picard



:huh2: i dont even really watch star trek..


ohh well.. add it to the features to add for the next release

wheres the im with stupid smiley when you need it

[Chris@HPTuners]

there is no master on/off switch in the code guys, the enable temp is the thing to use.

[Missing2]

there is no master on/off switch in the code guys, the enable temp is the thing to use.

??? please give a clear explanation on how to do it then please

[arthansen]

The V6 does not have temp control. All we have is AFR based on fuel flow. Either the temp control or the on/off would be nice.

[Chris@HPTuners]

the enable temp bug has been fixed, we will be making this available in 1.6 (or sooner if you email us your customer ID).

[arthansen]

E-mail sent. Thanks.