Right now I have a z28 & hhr ss that I tune with hptuners but I'm about to sell both and get on the list for a 2011 mustang 5.0. Will you guys offer tuning for it like for my z28 and hhr ss? I've never tuned a Ford before so I was also wondering if you offer all the parameters you do on the chevy engine for the Ford crowd as well?
thanks
Chris
2016 Camaro SS
Full exhaust, rotofab CAI, ported IM/TB, E85, 3600rpm stall TC
If it uses the same oak pcm as the 2010's yes we'll likely be able to support it.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Also looking at getting a 2011 Mustang GT... sure hope its the same PCM.
The new 5.0 will be a huge market, I as well hope we support it because I am starting to tune the newer Ford vehicles now as well.
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
I have a buddy that just took delivery of his 5.0 yesterday and wants me to look at the tuning. Talk about a delay from the factory built into the throttle control!
Bill - if there is anything I can look at or provide for you to look at with regards to his car shoot me a PM.
Thanks.
Kevin Conway
2002 Camaro SS M6
...402 LS2, and a lot of other wasted money...
Try reading the pcm and contact support at hptuners.com with a vcm suite infolog while connected to the vehicle in question.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Will do as soon as he gets off work tonight Bill. Does it matter what version of the software that I run for this? I still have version 2.22.3152.xxx installed on the laptop, but I have a beta version install file from a couple of months ago...
And, do I need some open credits for Ford on it? Currently all of my credits are allocated.
Thanks.
Kevin Conway
2002 Camaro SS M6
...402 LS2, and a lot of other wasted money...
Shoot support an email I can send you the newest beta which will give you the best shot at reading it.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Got the beta. Pulled an info file with the version I had installed as well as the beta. Also took a screenshot of the error when trying to read the PCM (Ignition cycle timeout).
Sending the email to you guys now - let me know if there is anything else I can help out with.
Thanks!
Kevin Conway
2002 Camaro SS M6
...402 LS2, and a lot of other wasted money...
Whats the status on support for the 2011 Mustang 5.0? I have one of these mills and want to tune this baby!
The mustang and this motor have had a massive amount of press. This car will be the next 5.0 mustang from the mid 90's. Its already getting a huge following.
David
Still on deck to be worked on, won't make SEMA for the looks of it.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Any updates?
Kevin Conway
2002 Camaro SS M6
...402 LS2, and a lot of other wasted money...
Same question. I've got a guy that wants me to tune the '11 GT for him with HPT. If you need any reads I'm willing to work with you. Thanks for any info! -R.C.Originally Posted by Lankness
Hello, do ya'll just come on here and skip this thread? What is the status?
Still working on it.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Bill are we there yet?
"Live Young, Die Hard, and be a Good Looking Corpse"
1999 Ford Lightning, Built Motor, Manly Rods/Pistons
Forged Crank, Howard Cams, Port Polished Heads
Built 4R100 Trans, Ford Locker Differential
Long Tube Headers, High Flow Cats (if any)
150 - Two Stage Nitrous Intake Injected
Eaton Supercharger with 2 lb upper, 10 lb lower
20 lbs boost, 55 psi fuel pressure, all tuned to 14.7.
WOT 11.8, NGK 4177 Plugs at .031
100 Added Lbs in Rear of Bed
Nope
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Can we read it? Are you accepting reads from it if we are able to? I have a co-worker with one.
Can't communicate with them
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Any ETA on this ?
Reply With Quote